Igwe anaghị agba nchara 2b elu 300 Series 304L Cold Rolled igwe anaghị agba nchara si China
Nkọwa ngwaahịa:
Ihe na-ekpo ọkụ ere 2b elu 300 Series 304L Cold Rolled igwe anaghị agba nchara
| Ọkwa | 300 usoro 304L |
| Akụrụngwa | Austenitic, Ferritic, Martensitic, Duplex, oyi akpọrepu, Hot akpọrepu |
| Ọkọlọtọ | ISO, ASTM, SUS, GB |
| Ogologo | 6000mm ma ọ bụ dị ka ahaziri |
| Obosara | 2438,3048,2000,3000mm ma ọ bụ dị ka ahaziri |
| Ọkpụrụkpụ | 0.3-4.5mm |
| elu | 2B |
| Ụdị | BAOSTEEL, TISCO, ZPSS |
| Asambodo | MTC |
| Ihe atụ | Nlereanya efu |
| Oge Mbuga ozi | N'ime 7-15 ụbọchị |
| Ngwa | Ihe owuwu, ihe owuwu, ụlọ, ngwa kichin |
304L bụ alloy kachasị arụ ọrụ na nke a na-ejikarị na ezinụlọ igwe anaghị agba nchara.Dị mma maka ụdị ụlọ na ngwa azụmahịa dị iche iche, Alloys 304L na-egosipụta nguzogide corrosion dị mma ma nwee ịdị mfe nke ịmepụta, ọdịdị pụtara ìhè.A na-ewerekwa igwe anaghị agba nchara austenitic dị ka ihe kachasị mma nke nchara dị elu ma nwee ike ịgbanye ya site na nhazi niile na usoro ịgbado ọkụ.
Ngwakọta kemịkalụ
| 304l | C | Si | Mn | P | S | Ni | Cr |
| ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8.00-12.00 | 18.00-20.00 |
Njirimara anụ ahụ
| 304l | Ike ọdụdọ: | σb (MPa) ≥520 |
| Ike mpụta: | σ0.2 (MPa) ≥205 | |
| Mgbatị: | 5 (%) ≥40 | |
| Isi ike: | ≤187HB;≤90HRB;≤200HV | |
| Njupụta: | 7.93g / cm3 | |
| ike okpomọkụ kpọmkwem | c (20ºC) 0.502 J·(g·C) -1 | |
| okpomọkụ conductivity | λ/W (m·ºC)-1 | |
| ebe agbaze | 1398-1420ºC |
Mpempe akwụkwọ igwe anaghị agba nchara oyi
0.3mm-3.0mm(TK)*1000mm(W)*2000mm(L)
0.3mm-3.0mm(TK)*1219mm(W)*2438mm(L)
0.3mm-3.0mm(TK)*1500mm(W)*3000mm/6000mm(L)
Mpempe igwe anaghị agba nchara na-ekpo ọkụ
3mm-150mm(TK)*1000mm(W)*2000mm(L)
3mm-150mm(TK)*1219mm(W)*2438mm(L)
3mm-150mm(TK)*1500mm(W)*3000mm/6000mm(L)
Foto ngwaahịa
Dee ozi gị ebe a ziga anyị ya
